The door will settle approx.
Larson storm door latch installation instructions.
Do not over tighten screws.
Drill holes straight through door fig.
If the spindles included with your replacement handle set are too long you can cut them to length.
After you ve double checked the alignment and proper operation of your larson storm door predrill the holes and fasten the latch rail to your brickmould with screws.
Push door tight against door frame.
Fold along the dashed lines place along edge of door on latch side for hinged door only place this side of template.
Slide the rail extender down to the doorsill.
Place the new handle onto the outside of the door.
Prepare to install your storm door step 2.
Move up or down to adjust using the enclosed template as your guide center punch and drill the three holes for the latch with a 5 16 drill bit.
Tape the template on the inside of the storm door as indicated on the template.
Easy access to our entire collection of how to videos providing answers to your larson storm and screen door and window questions.
With the handle on the door the spindle should extend 5 16 through the other side the storm door fig.
Install your door hardware according to the included instructions and placement template.
Kung fu maintenance shows larson storm door latch lock assembly plus sweep install kung fu maintenance video.
Then move it down so it barely touches the doorsill.
Type 150 closer installation instructions pdf.
Get or price the larson low e clear view storm.
At the bottom of the door slide the expander into place.
It should not touch the mechanism of the inside latch.
Drill 1 8 pilot hole on all holes.
Make sure the storm door latch will not hit against your inside door knob.
Tighten screw while pushing top of hinge rail tight against the door frame.
Follow the drilling instructions on the template.
5a 5c 5d hang storm door onto door frame using the placeholder screw.
Fold template along dotted line prior to taping.
Insert latch assembly into latch hole fig.